HW-MK2P General Purpose Relay 10A, Dual Contacts, Socket Mount

Model: HW-MK2P

Product Characteristics:

①Small size, light weight, high sensitivity, long service life.

②Provide 2 set 10A of contact conversion.

③Socket mounted type.

④Optional indicator lamps and diodes available.

Additional information

Contact resistance

≤100mΩ

Electrical life

≥10⁵ times

Mechanical life

≥10⁶ times

Coil voltage

DC: 6-220V AC: 6-380V

Suction time

≤20ms

Product Details

Model Description

HW MK 2 Optional Optional L D VDC

①Enterprise code: Hangwang Electric

②Serial number: MK

③Number of contact groups: 2

④Contact form: (Z-conversion type  H-normally open type  D-normally closed contact)

⑤Mounted type: P: PCB mounted type  No letters: plug-in mounted

⑥Operating state: L: LED indicate  No letters: no indicate

⑦Auxiliary function: D/CR Inhibitory protection

⑧Coil voltage: (DC: direct voltage  AC: alternating voltage)

 

Contact parameters

Contact form 2Z,2H,2D
Contact load 10A
Maximum switching voltage 240VAC 5A
28VDC 5A
Contact material Silver alloy

Operating Coils

Rated voltage V DC12V DC24V DC110V DC220V
Rated current(+10%)mA 150 75 16.3 8.1
Coil resistance(+10%)Ω 80 320 6748 27160
Rated power consumption W 2W
Pick-up voltage(max)V Less than 75%
Drop-out voltage (min) V 10% or more
Allowable voltage(max) V Rated voltage ×110%

 

Rated voltage V AC12V AC24V AC110V AC220V
Rated current(+10%)mA 225 112.5 24.5 12.3
Coil resistance(+10%)Ω 18.7 74.7 1571 6260
Rated power consumption W 3.5VA
Pick-up voltage(max)V Less than 80%
Drop-out voltage (min) V 30% or more
Allowable voltage(max) V Rated voltage ×110%

Product Technical Parameters

Contact resistance ≤100mΩ
Electrical life ≥10⁵ times
Mechanical life ≥10⁶ times
Coil voltage DC: 6-220V AC: 6-380V
Suction time ≤20ms
Release time ≤15ms
Between the same pole contacts 1000VAC/1min(Leakage current 1mA)
Between opposite pole contacts 1000VAC/1min(Leakage current 1mA)
Between contact and coil 1500VAC/1min(Leakage current 1mA)
Insulation resistance ≥100MΩ(500VDC)
Ambient temperature -25°C ~ +55°C
Ambient humidity 35% ~ 80%RH
Atmospheric pressure 86 ~ 106KPa
Impact resistance 10G (Sine wave half pulse: 11ms)
Vibration resistance 10-55Hz (Double amplitude: 1.5mm)
Dimensions 35 × 35 ×55mm
Weight About 75g

Product Size and Installation

Selection Guide

Unless otherwise specified, all load currents indicated on the Hangwang relay case are for resistive loads. Under the rated switching voltage, the allowable current of inductive loads should not exceed 30% of the rated resistive loads, the allowable current of motor loads should not exceed 20% of the rated resistive loads, the allowable current of lamp loads should not exceed 10% of the rated resistive loads, and the allowable current of capacitive loads should not exceed 5% of the rated resistive loads. In order to ensure the reliability of the product, it is recommended that the contact load current value should not exceed 60% – 70% of the steady state current value under the rated load of the product.

Nature of the load Inrush current
Resistive load 1 times the steady-state current
Sodium lamp load 1-3 times the steady-state current
Mercury-vapor lamp load 3 times the steady state current
Inductive load 3-5 times the steady-state current
Motor load 3-5 times the steady-state current
Voltage load 3-5 times the steady-state current
Incandescent lamp load 3-5 times the steady-state current
Capacitive load 3-5 times the steady-state current

 

For more information on relay selection, please view the Selection Guide . Also, to ensure that you use our products correctly and safely, be sure to read the Matters Needing Attention .

Get Quote Today

Related Products